Unit II Project Ventilation Report You are employed by Be Safe Consulting, Inc. (BSCI) as an entry-level safety consultant. You report directly to Bob Sanders, the supervising Certified Safety Professional (CSP). BSCI has been contracted by Acme Manufacturing Co. to conduct a study to determine employee exposures to various particulates and gases. In addition, your company has been contracted to determine if the current ventilation systems that are in place are adequate to protect employees from an over exposure to these chemicals. After conducting a field assessment, prepare a written report that Bob Sanders can utilize to prepare a final comprehensive report for the Board of Directors. During your field investigation, you find the following field observations: Welding Room The company has six welding booths, or areas that are partitioned only for the use of welding curtains. The booth is open to mixing in the front and top. The company is worried about the welders exposure to iron oxide (PEL 10 mg/m3). For a valid sample, you must have a minimum of six hours of sampling (The remaining two hours of the work day is considered to be equal to or less than the sampled exposure. As a result of your air sampling over an eight-hour time period (i.e., the work schedule), you receive the following analytical report: OSH 4308, Advanced Concepts in Environmental Safety Management 3 NameLocationConc. 1Time 1Conc. 2Time 2Conc. 3Time 3 Anne WeldingBooth #14.3 mg/m3150 min.3.7 mg/m3150 min2.2 mg/m3240 min Frank WorldlyBooth #22.1 mg/m3180 min2.8 mg/m3120 min3.1 mg/m3240 min Jim YoungBooth #31.7 mg/m3205 min1.25 mg/m3125 min1.03 mg/m3150 min Betty JohnsonBooth #412.8 mg/m3165 min11.2 mg/m372 min9.8 mg/m3123 min Jack JonesBooth #57.8 mg/m3190 min14.2 mg/m3149 min8.8 mg/m3140 min Joey AppertonBooth #63.9 mg/m3155 min4.6 mg/m390 min2.1 mg/m346 min